led street light fixture Overhaul Guide: Common problems and Solutions
The installation and maintenance of led street light fixtures is essential for urban lighting. However, street lights will inevitably break down and have problems. This article will introduce some common problems and solutions, so that the staff can quickly solve the street lamp failure.
Problem 1: The street light is not bright or the brightness is reduced
This can be due to a number of reasons, including:
1. Bulb damage: Check whether the bulb is blown, if there is a fuse should be replaced in time.
2. The power cable is in poor contact. Check whether the power cable is securely connected.
3. If the power supply is faulty, check whether the power supply works properly. If the power supply is abnormal, replace it in time.
4. If the controller is faulty, check whether the controller is normal. If the controller is abnormal, debug or replace it in time.
In response to the above problems, timely maintenance or replacement of the corresponding parts can solve the problem that the street lamp is not bright or the brightness is reduced.
Problem 2: Street lights flicker or switch frequently
Blinking or frequent switching can be one of the following problems:
1. Power supply is unstable: Check whether the power supply voltage is stable. If it is unstable, repair the power supply problem.
2. Bulb aging: If the life of the bulb used has reached, the new bulb should be replaced in time.
3. Controller fault: Check whether the controller works normally. If not, replace or repair it.
4. The circuit connection is loose: check whether the circuit connection is loose. If it is loose, fix the connection again.
Finding the key to the problem and solving the problem of the power supply or light bulb can solve the situation of the street lamp flashing or frequent switching.
Problem 3: The illumination of street lamps is uneven
Uneven lighting may be caused by the following reasons:
1. Unbalanced light distribution: Check whether the light distribution is uniform, if not, adjust the light source layout.
2. Light pole tilt: Check whether the light pole is tilted, and if it is tilted, it needs to be re-installed.
3. Contaminated or damaged lampshade: Check whether the lampshade is contaminated or damaged and needs to be cleaned or replaced.
4. Controller Settings: Check whether the Settings of the controller are correct to ensure that the lighting system works normally.
By solving these problems, it can help improve the illumination distribution of street lamps and improve the lighting effect of street lamps.
Problem 4: Street lights go out prematurely
Premature loss of street lights may be one of the following causes:
1. Power supply is unstable: Check whether the power supply voltage is stable. If it is unstable, repair the power supply problem.
2. Bulb aging: bulb life has reached, should be replaced in time with a new bulb.
3. Controller fault: Check whether the controller works normally. If not, replace or repair it.
4. Poor heat dissipation of the lamp: check whether the heat dissipation of the lamp is normal, if it is abnormal, it should be repaired or replaced.
Solving the above problems can extend the service life of street lights and ensure the normal operation of street lights.
Problem 5: The street light color is abnormal
Abnormal street light color may be one of the following reasons:
1. Bulb quality problem: Check whether the quality of the bulb is qualified, if not, replace the high-quality bulb.
2. If the power output is abnormal, check whether the power output is stable. If the power output is abnormal, rectify it.
3. Control system failure: check whether the control system works normally. If not, repair or replace the control system.
4. Aging of lamps: If the lamps are used for too long, the new lamps should be replaced in time.
Solving the above problems can ensure that the lighting effect of the street lamp is normal and maintain the consistency of the light color.
Sum up
This paper introduces the common problems and solutions of led street light fixture. By finding and solving the fault in time, the street lamp can keep working normally and provide a good lighting effect. Hopefully, this guide will be helpful to those who maintain led street light fixtures.
led street light fixture Adaptive dimming performance for day and night changes
led street light fixture fault maintenance and maintenance of key tips and precautions
led street light fixture overhaul process and operation suggestions
What do I need to pay attention to when buying led street light fixture
