solar led street light maintenance
With the rapid development of solar power technology, solar led street light has been widely used, especially in the construction of new rural areas in remote mountainous areas where the construction of transmission facilities is not convenient. However, in order to extend the service life, necessary maintenance must be carried out. What should be done to maintain solar led street light?
1.in case of wind, rain, snow or thunderstorm, should immediately check whether the switchboard is normal, control room and battery whether indoor water, after the storm equipment is working normally, its charge and discharge controller damage, etc.
2.solar led street light source routine inspection, relatively simple. First, the impact of hard and sharp objects is still strictly prohibited. At the same time, check the working state of the light source regularly. Once found individual lamp beads are not bright, must be timely maintenance, so as not to damage the whole lamp.
3.When the weather is bad, check whether the connecting wire and ground wire of the panel are in good contact and whether they fall off. Check whether the panel support is loose or broken.
4.The solar panels, the daily maintenance of the solar panels is a key component in the supply of energy to the solar led street light system, so it is necessary to ensure that the solar panels are complete, clean and well lit. In order to prevent hard or sharp solar panels from being damaged, it is forbidden to throw debris on the solar panels, clean and check regularly, and the branches blocking solar panels should be repaired in time.
5.Inspection and maintenance of solar lamp poles and accessories. In this regard, it is particularly important to note the complete configuration of street light inspection and installation doors. If it is damaged or lost, repair it in time. Since the solar led street light controller and related lines are installed in the interior, it is easy to cause short circuit and damage after the rain enters, and the wires are easy to be disconnected due to the open circuit, which seriously affects the service life of the solar led street light system.
6.Solar cell square lighting should be kept clean at all times. If there is dust or other dirt, please gently wipe with clean gauze water, do not use hard objects or corrosive solvents to clean.
7.the maintenance of solar battery mainly includes: one is to pay attention to anti-theft; Secondly, check whether the charging and discharging of solar led street light is normal - you can make a preliminary judgment by referring to the working state of the solar led street light controller; At the same time, you can check the battery charging and discharging power levels; It is strictly prohibited to adjust the working state of the solar led street light controller without authorization, so as to avoid overrush and overdischarge of the battery.
8.solar led street light post should be beautiful after installation. From the foundation construction, according to the main line to control the position of the lamp straightness, and according to the road design reasonable change. Light pole should be straight, machining weld and inspection mouth should avoid the main direction.
9.solar led street light controller, affecting lighting time and system brightness changes. Since each component of the solar led street light system has a different life span, the battery and the solar led street light controller are primarily responsible for controlling the brightness and lighting time. If you find that the street lighting time is insufficient, you should first check the battery power supply, at the same time check the solar led street light controller. Each manufacturer's controller comes with a manual and is usually equipped with a working status display light. On this basis, we can judge whether the solar led street light system works normally.
The above maintenance of solar led street light is shared with you here. solar led street light has no complex and expensive plumbing like municipal electric street lamps. It can be installed anywhere, making it convenient, flexible, safe and energy saving. The charging and switching process is intelligently controlled by computer, eliminating the need for manual operation, saving power and maintenance.
How to wire solar led street light?
What components are contained in a solar led street light
What is the correct way to install solar led street light?
