solar led street light installation scheme
Before installing solar led street light, determine the position of the vertical light; Investigate the geological conditions. If the surface of 1m 2 is soft soil, the excavation depth should be deepened; Also, make sure there are no other facilities (such as cables, pipes, etc.). Excavate the position below, and there is no long-term blocking object at the top of the street lamp. Otherwise, the position should be appropriately changed. Reserve (dig) a pit of 1m 3 in line with the standard at the position of the standing lamp; Placement of embedded parts. The embedded part is placed in the center of the square pit, one end of the PVC threading pipe is placed in the center of the embedded part, and the other end is placed in the battery storage place. Pay attention to keep the embedded parts, foundation and the original ground on the same level (or screw top and the original ground on the same level, depending on the site needs), one side is parallel to the road; This will ensure that the pole is upright and does not skew. C20 concrete is then poured and fixed. During the pouring process, vibrator should not stop vibrating to ensure the overall compactness and firmness. After completion of construction, it should be cleaned up in time.
The correct way to install solar led street light:
1. Installation position of solar led street light
The most important thing for solar led street light and solar garden is to receive good light energy, so the location becomes the first problem to pay attention to in the installation process of solar led street light. At the installation site, first observe whether there are any barriers or obstructions around the foundation. There should be no trees, high-rise buildings and other obstacles that affect the light, and it should not be installed in a backlit place.
2. The basic part of solar led street light
solar led street light base size and firmness. Whether the foundation is firm directly affects the safety of the lamp post, so the foundation must be operated in strict accordance with the construction drawings, must grasp the size, material and other important data. solar led street light the texture of the land around the foundation. It is also related to the safety of lamp posts. The soil around the foundation should be of low humidity and high strength, which can prevent unsafe behaviors such as lamp post tilting under the action of thrust. solar led street light foundation threading hole location and flatness. The function of the threading hole is to lead the battery wire from the ground into the lamp post. If the threading hole is offset, installing the light pole will block the threading hole. If there is a foreign object or knot in the threading hole, the threading hole will be completely blocked. In both cases, the battery line cannot be introduced and the lamp cannot be effectively powered.
3. Threading part of solar lamps
solar led street light in the process of threading, there is no connector inside the lamp post, all connecting wires must be a complete wire. (With the exception of some light sources that come with their own leads, pay attention to the connection between the lamp head and the light source inside the pole. Must be connected closely, do a good job of waterproof and leakproof work. Pay attention to prevent the lamp cap from falling off under the influence of gravity when connected). In the process of threading, we must pay attention to technology. It is strictly prohibited to pull hard, so as to prevent the wire from being interrupted by force or the insulation layer and leakage.
4. Install LED street light sources and solar panels.
The main issues that need attention are the firmness of the power cord connection and the tightness of the screws. When connecting all wires, it is necessary to do a good job of anti-fall and anti-leakage work, and the connection is close and beautiful. In the process of fastening screws, it is necessary to grasp the tightness, not too loose or too tight, and move the right amount in accordance with the principle of fastening motionless. Should not be too tight, to prevent the screw due to excessive force and slip; Not too loose, to prevent some parts loose and shift. When installing the light board, it is necessary to master the direction. The standard light plate faces due south, where the light is strong and the day lasts long. Under special circumstances, if it cannot face south, the principle of long illumination time and high illumination intensity should be adopted.
5. Installation of solar led street light rod
Before installing a solar lamp post, be sure to check all power cords for leaks and correct them as soon as possible. You must pay attention to safety in the process of erecting electric poles. When tightening the corner screw, adjust the direction and level of the light pole. Do not tilt back and forth or shift left and right. After all the work is done, the anchor screws must be tightened again to make them firm.
What is the lifespan of solar powered street lights?
What is the standard spacing of solar led street light installation?
How to wire solar led street light?
